ABB CRB 15000 Product Manual page 719

Spare part
Swing
Swing (CRB 15000-10/1.52)
Swing (CRB 15000-12/1.27)
Flange socket head screw with
glue
Cable tie
Required tools and equipment
Equipment
Lifting aid
Lifting aid
Guide pin, M4x120
Guide pin, M5x150
Standard toolkit
Required consumables
Consumable
Cleaning agent
Flange sealant
Product manual - CRB 15000
3HAC077389-001 Revision: L
Article number
3HAC073933-001
3HAC087548-001
3HAC087547-001
3HAB3413-435
3HAC075545-001
Article number
3HAC077788-001
3HAC087787-001
3HAC077786-001
3HAC087786-001
-
Article number
-
-
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.5.2 Replacing the swing
Continued
Note
Used for CRB 15000-5/0.95.
Also order new attachment
screws for the axis-2 joint unit:
3HAB3413-435 (12 pcs).
Used for CRB 15000-10/1.52.
Also include O-ring
(3HAC061327-073) and O-ring
(3HAC061327-044).
Used for CRB 15000-12/1.27.
M4x35 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue , 12 pcs
Used for joint unit of CRB 15000-
5/0.95.
Always use new screws when re-
fitting a joint unit. If ordering a
new joint unit spare part, new
screws are included.
For securing joint unit cable.
Note
For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95.
Attachment screws M4x35 (4 pcs)
are enclosed.
For joint units on axes 1 and 2 of
CRB 15000-10/1.52 and CRB
15000-12/1.27.
A plate, a beam, a pair of semicir-
cular blocks and attachment
screws M5x30 (2 pcs) are en-
closed.
Always use guide pins in pairs.
For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95 and axis 3
of CRB 15000-10/1.52 and CRB
15000-12/1.27.
Always use guide pins in pairs.
For joint units on axes 1 and 2 of
CRB 15000-10/1.52 and CRB
15000-12/1.27.
Content is defined in section
Standard toolkit on page 1087.
Note
Isopropanol
Loctite 574
Continues on next page
719