ABB CRB 15000 Product Manual page 494

5 Repair
5.3.9 Replacing the brake release unit
Continued
6
Refitting the brake release unit
1
2
Continues on next page
494
Action
Disconnect the brake release cable from the
board.
Action
Wipe, lubricate and fit the o-ring to its groove.
Replace if damaged.
If not already fitted, place the sheet metal inside
the cover.
© Copyright 2021 - 2023 ABB. All rights reserved.
Note
xx2100000417
Note
O-ring: 3HAB3772-119
Grease: 3HAC031695-001
Harmonic Grease 4B No.2
Used to lubricate the seals.
xx2100000419
xx2100000420
Product manual - CRB 15000
3HAC077389-001 Revision: L