ABB CRB 15000 Product Manual page 678

5 Repair
5.5.1 Replacing the base
Continued
2
3
4
Continues on next page
678
Action
Fit the lifting aid to the joint unit, on the torque
sensor side.
CAUTION
The connectors and the joint unit cables are
sensitive to mechanical damage. Handle the as-
sembly with care.
Place the two semicircular blocks surrounding the
joint unit, and use two fully threaded attachment
screws as removal tools to press the joint unit out
of position.
Remove the joint unit from the swing.
CAUTION
The connectors and the joint unit cables are
sensitive to mechanical damage. Handle the as-
sembly with care.
© Copyright 2021 - 2023 ABB. All rights reserved.
Note
Lifting aid: 3HAC087787-001
Screws: M5x30 (4 pcs for plate and
2 pcs for beam)
xx2300000771
xx2300000772
xx2300000773
xx2300000774
Product manual - CRB 15000
3HAC077389-001 Revision: L