ABB CRB 15000 Product Manual page 279

Refitting the swing(-10/1.52 and -12/1.27)
1
2
3
4
Product manual - CRB 15000
3HAC077389-001 Revision: L
Action
Valid for CRB 15000-10/1.52
Fit the o-ring to groove.
Replace if damaged.
Valid for CRB 15000-10/1.52
Refit the swing flange with the attachment screws.
Always check the serial number printed on the
swing parts and use the parts in the same number
for refitting.
CAUTION
Do not use the pre-assembling screws of swing
parts for securing.
Valid for CRB 15000-10/1.52
Fit the o-ring to groove.
Replace if damaged.
Valid for CRB 15000-10/1.52
Refit the swing transition with the attachment
screws.
Always check the serial number printed on the
swing parts and use the parts in the same number
for refitting.
CAUTION
Do not use the pre-assembling screws of swing
parts for securing.
© Copyright 2021 - 2023 ABB. All rights reserved.
5.3.2 Replacing the axis-1 cabling
Note
O-ring: 3HAC061327-073
xx2300000820
Hex socket head cap screw: M5x25
12.9 Lafre 2C2B/FC6.9 (16 pcs)
Tightening torque: 8.2 Nm
xx2300000818
O-ring: 3HAC061327-044
xx2300000821
Hex socket head cap screw: M5x25
12.9 Lafre 2C2B/FC6.9 (16 pcs)
Tightening torque: 8.2 Nm
xx2300000817
Continues on next page
5 Repair
Continued
279