Loads Fitted To The Robot, Stopping Time And Braking Distances - ABB CRB 15000 Product Manual

Hide thumbs Also See for CRB 15000:

Table of Contents

3 Installation and commissioning

3.3.7 Loads fitted to the robot, stopping time and braking distances

Define loads carefully

Any loads mounted on the robot must be defined correctly and carefully (with

regard to the position of center of gravity and mass moments of inertia) in order

to avoid jolting movements and overloading motors, gears and structure.

Load diagrams, permitted extra loads (equipment) and their positions are specified

in the product specification. The loads must be defined in the software.

Stopping time and braking distances

The performance of the motor brake depends on if there are any loads attached

to the robot.

See the product specification for the robot, listed in

Incorrectly defined loads may result in operational stops or major damage to the

References on page

Product manual - CRB 15000

3HAC077389-001 Revision: L