ABB CRB 15000 Product Manual page 423

6
7
Product manual - CRB 15000
3HAC077389-001 Revision: L
Action
Disconnect the connectors that belongs to the
axis-5 cabling, from the axis-4 drive board:
• D3/4.X2
• D3/4.DC-
• D3/4.DC+
Use tweezers, if needed.
Pull out the cabling carefully from the tubular.
© Copyright 2021 - 2023 ABB. All rights reserved.
5.3.6 Replacing the axis-5 cabling
Note
Tweezers
xx2000002125
Valid for CRB 15000-5/0.95
xx2000002126
Valid for CRB 15000-10/1.52 and
CRB 15000-12/1.27
xx2300000844
Continues on next page
5 Repair
Continued
423