ABB CRB 15000 Product Manual page 849

Required spare parts
Spare part
Joint unit
Required tools and equipment
Equipment
Lifting aid
Guide pin, M4x120
Protection plate
Cable tie gun EVO 7i
Standard toolkit
Required consumables
Consumable
Cleaning agent
Flange sealant
Cable ties
O-ring
O-ring
Product manual - CRB 15000
3HAC077389-001 Revision: L
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2021 - 2023 ABB. All rights reserved.
5.6.3 Replacing the axis-2 joint unit (CRB 15000-5/0.95)
Article number
3HAC079141-001
Article number
3HAC077788-001
3HAC077786-001
3HAC077790-001
-
-
Article number
-
-
-
3HAC061327-047
3HAC061327-044
5 Repair
Continued
Note
Used for CRB 15000-5/0.95.
New attachment screws and
cable tie 3HAC075545-001 are
included in the delivery.
Note
For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95.
Attachment screws M4x35 (4 pcs)
are enclosed.
Always use guide pins in pairs.
For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95 and axis 3
of CRB 15000-10/1.52 and CRB
15000-12/1.27.
For protection of drive board
during cabling installation on joint
units of CRB 15000-5/0.95.
HellermannTyton 110-77001 or
similar
Content is defined in section
Standard toolkit on page 1087.
Note
Isopropanol
Loctite 574
Cover for axis 2/3, used for CRB
15000-5/0.95.
Replace if damaged.
Lower arm, inner cover of CRB
15000-5/0.95. 1 pcs / cover.
Replace if damaged.
Continues on next page
849