ABB CRB 15000 Product Manual page 564

5 Repair
5.4.3 Replacing the tubular
Continued
Equipment
Guide pin, M3x110
Standard toolkit
Required consumables
Consumable
Cleaning agent
Flange sealant
Cable ties
O-ring
O-ring
O-ring
Grease
O-ring
O-ring
Gasket
O-ring
O-ring
Continues on next page
564
Article number
3HAC077787-001
-
Article number
-
-
-
3HAC061327-043
3HAB3772-166
3HAC061327-076
3HAC042536-001
3HAC061327-051
3HAC061327-051
3HAC075056-001
3HAC061327-047
3HAC061327-047
© Copyright 2021 - 2023 ABB. All rights reserved.
Note
Always use guide pins in pairs.
For joint units on axes 4, 5 and 6.
Content is defined in section
Standard toolkit on page 1087.
Note
Isopropanol
Loctite 574
Tubular cover, used for CRB
15000-5/0.95.
Replace if damaged.
Tubular cover, upper, used for
CRB 15000-10/1.52 and CRB
15000-12/1.27.
Replace if damaged.
Tubular cover, lower, used for
CRB 15000-10/1.52 and CRB
15000-12/1.27.
Replace if damaged.
Shell Gadus S2
Axis-4 cover, used for CRB
15000-5/0.95.
Replace if damaged.
Axis-4 cover, used for CRB
15000-10/1.52 and CRB 15000-
12/1.27.
Replace if damaged.
Cover inside housing
Replace if damaged.
Cover for axis 2/3, used for CRB
15000-5/0.95.
Replace if damaged.
Housing cover, used for CRB
15000-10/1.52 and CRB 15000-
12/1.27.
Replace if damaged.
Product manual - CRB 15000
3HAC077389-001 Revision: L