ABB CRB 15000 Product Manual page 574

5 Repair
5.4.3 Replacing the tubular
Continued
Removing the tubular cover
1
2
Separating the cabling between the tubular and the tilt
1
Continues on next page
574
Action
Valid for CRB 15000-5/0.95
Remove the cover by removing the six screws.
Dispose the screws. New screws must be used
when refitting the cover.
New screws are included in the spare part delivery
of the joint unit.
Valid for CRB 15000-10/1.52 and CRB 15000-
12/1.27
Remove the covers by removing the screws.
Action
Cut the cable ties on joint unit.
© Copyright 2021 - 2023 ABB. All rights reserved.
Note
xx2000002123
xx2300000841
Note
xx2000002086
Product manual - CRB 15000
3HAC077389-001 Revision: L