ABB CRB 15000 Product Manual page 344

5 Repair
5.3.4 Replacing the axis-3 cabling
Continued
Required spare parts
Spare part
Cable harness, joint 3
Cable harness, joint 3
Cable tie
Required tools and equipment
Equipment
Lifting aid
Lifting aid
Guide pin, M4x120
Protection plate
Protection plate
Cable tie gun EVO 7i
Standard toolkit
Required consumables
Consumable
Cable ties
O-ring
Continues on next page
344
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2021 - 2023 ABB. All rights reserved.
Article number Note
3HAC073207-001 Used for CRB 15000-5/0.95.
Also order new Cable tie:
3HAC075545-001.
3HAC080965-001 Used for CRB 15000-10/1.52 and
CRB 15000-12/1.27.
Also order new Cable tie:
3HAC075545-001.
3HAC075545-001 For securing joint unit cable.
Article number Note
3HAC077788-001 For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95.
Attachment screws M4x35 (4 pcs)
are enclosed.
3HAC087788-001 For joint unit on axis 3 of CRB
15000-10/1.52 and CRB 15000-
12/1.27.
3HAC077786-001 Always use guide pins in pairs.
For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95 and axis 3
of CRB 15000-10/1.52 and CRB
15000-12/1.27.
3HAC077790-001 For protection of drive board
during cabling installation on joint
units of CRB 15000-5/0.95.
3HAC087789-001 For protection of drive board
during cabling installation on joint
units of CRB 15000-10/1.52 and
CRB 15000-12/1.27.
- HellermannTyton 110-77001 or
similar
- Content is defined in section
Standard toolkit on page
Article number Note
-
3HAC061327-047 Cover for axis 2/3, used for CRB
15000-5/0.95.
Replace if damaged.
1087.
Product manual - CRB 15000
3HAC077389-001 Revision: L