ABB CRB 15000 Product Manual page 905

Required spare parts
Spare part
Joint unit
Joint unit
Required tools and equipment
Equipment
Lifting aid
Lifting aid
Guide pin, M4x120
Protection plate
Protection plate
Cable tie gun EVO 7i
Standard toolkit
Required consumables
Consumable
Cleaning agent
Flange sealant
Product manual - CRB 15000
3HAC077389-001 Revision: L
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2021 - 2023 ABB. All rights reserved.
5.6.5 Replacing the axis-3 joint unit
Article number Note
3HAC079141-001 Used for CRB 15000-5/0.95.
New attachment screws and
cable tie 3HAC075545-001 are
included in the delivery.
Used for CRB 15000-5/0.95.
3HAC087474-001 Used for CRB 15000-10/1.52 and
CRB 15000-12/1.27.
New O-ring 3HAC061327-036 and
cable tie 3HAC075545-001 are
included in the delivery.
Article number Note
3HAC077788-001 For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95.
Attachment screws M4x35 (4 pcs)
are enclosed.
3HAC087788-001 For joint unit on axis 3 of CRB
15000-10/1.52 and CRB 15000-
12/1.27.
3HAC077786-001 Always use guide pins in pairs.
For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95 and axis 3
of CRB 15000-10/1.52 and CRB
15000-12/1.27.
3HAC077790-001 For protection of drive board
during cabling installation on joint
units of CRB 15000-5/0.95.
3HAC087789-001 For protection of drive board
during cabling installation on joint
units of CRB 15000-10/1.52 and
CRB 15000-12/1.27.
- HellermannTyton 110-77001 or
similar
- Content is defined in section
Standard toolkit on page
Article number Note
- Isopropanol
- Loctite 574
5 Repair
Continued
1087.
Continues on next page
905