Running The Cyclic Brake Check Routine - ABB CRB 15000 Product Manual

4 Maintenance

4.5.2 Running the Cyclic Brake Check routine

4.5.2 Running the Cyclic Brake Check routine
When to run the Cyclic Brake Check routine
The Cyclic Brake Check routine shall be run in the application every 8-48 hours.
For set-up, see Application manual - Functional safety and SafeMove.
For advanced users
If it is not possible to run the Cyclic Brake Check routine regularly in the application,
then:
198
• The holding brake safety is reduced to the equivalent of PL c.
• Use of such a configuration must be justified by risk assessment.
• The method described in
the brakes still function correctly.
© Copyright 2021 - 2023 ABB. All rights reserved.
Brake testing on page 35 can be used to check that
Product manual - CRB 15000
3HAC077389-001 Revision: L