3 Installation and commissioning
3.5.3 Testing the FlexPendant connection
3.5.3 Testing the FlexPendant connection
Introduction
The ASI Setting application can be used to verify to which robot the FlexPendant
is connected.
110
1 In the ASI Setting application, select Light indicator.
2 Toggle the Enabled switch to turn on or off the light ring on the robot.
3 Inspect on which robot the light ring is affected.
Note
This technique should also be used to verify a Robot Control Mate connection
before starting work.
© Copyright 2021 - 2023 ABB. All rights reserved.
Product manual - CRB 15000
3HAC077389-001 Revision: L