ABB CRB 15000 Product Manual page 418

5 Repair
5.3.6 Replacing the axis-5 cabling
Continued
Required spare parts
Spare part
Cable harness, joint 5
Cable harness, joint 5 (CRB 15000-
10/1.52)
Cable harness, joint 5 (CRB 15000-
12/1.27)
Cable tie
Required tools and equipment
Equipment
Lifting aid
Guide pin, M3x110
Tweezers
Protection plate
Cable tie gun EVO 7i
Standard toolkit
Required consumables
Consumable
Cable ties
O-ring
O-ring
Continues on next page
418
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2021 - 2023 ABB. All rights reserved.
Article number Note
3HAC073206-001 Used for CRB 15000-5/0.95.
Also order new Cable tie:
3HAC075545-001.
3HAC083669-001 Used for CRB 15000-10/1.52.
Also order new Cable tie:
3HAC075545-001.
3HAC083668-001 Used for CRB 15000-12/1.27.
Also order new Cable tie:
3HAC075545-001.
3HAC075545-001 For securing joint unit cable.
Article number Note
3HAC077789-001 For joint units on axes 4, 5 and 6.
Attachment screws M3x12 (4 pcs)
are enclosed.
3HAC077787-001 Always use guide pins in pairs.
For joint units on axes 4, 5 and 6.
- Used to handle drive board con-
nectors.
3HAC077790-001 For protection of drive board
during cabling installation on joint
units of CRB 15000-5/0.95.
- HellermannTyton 110-77001 or
similar
- Content is defined in section
Standard toolkit on page
Article number Note
-
3HAC061327-051 Axis-5 cover, used for CRB
15000-5/0.95.
Replace if damaged.
3HAC061327-051 Axis-5 cover, used for CRB
15000-10/1.52 and CRB 15000-
12/1.27.
Replace if damaged.
1087.
Product manual - CRB 15000
3HAC077389-001 Revision: L