ABB CRB 15000 Product Manual page 670

5 Repair
5.5.1 Replacing the base
Continued
3
4
Disconnecting the axis-2 joint unit cabling
1
2
Continues on next page
670
Action
CAUTION
Valid for CRB 15000-5/0.95
There is cabling connected between the cover
and the joint unit drive board.
Open the cover with care to avoid damage to the
cabling or the connector(s).
Do not leave the cover in location without being
secured with the attachment screws.
Remove the insert.
Action
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section
unit is sensitive to ESD on page
Cut the cable ties.
© Copyright 2021 - 2023 ABB. All rights reserved.
Note
xx2300000815
Note
The
53.
xx2000001946
Product manual - CRB 15000
3HAC077389-001 Revision: L