ABB CRB 15000 Product Manual page 214

5 Repair
5.3.1 Replacing the base cabling
Continued
Connecting the base cabling
1
2
3
4
Continues on next page
214
Action
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section
unit is sensitive to ESD on page
Reconnect the connectors to the drive board.
• D1.X1 to X1
• D1.DC+ to DC+
• D1.DC- to Ground
Connect the connectors to each other and snap
them to the cable holders.
• J1.DC+ to J1.DC+
• J1.DC- to J1.DC-
• J1.CS to J1.CS
• J1.CP to J1.CP
Secure the cables for functional earth and protect-
ive earth with a screw.
© Copyright 2021 - 2023 ABB. All rights reserved.
Note
The
53.
xx2100000405
xx2100000426
Hex socket head cap screw: M3x6
(1 pcs).
Tightening torque: 0.8 Nm.
xx2100000425
Product manual - CRB 15000
3HAC077389-001 Revision: L