ABB CRB 15000 Product Manual page 257

10
Connecting the axis-1 joint unit cabling
1
2
Product manual - CRB 15000
3HAC077389-001 Revision: L
Action
Remove the protection plate.
Action
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling
the unit read the safety information in section
The unit is sensitive to ESD on page
Reconnect the connectors to the drive board.
• D1.X1 to X1
• D1.DC+ to DC+
• D1.DC- to Ground
• D1.X4 to X4
• D1.X2 to X2
• D1.X5 to X5
• DR.X8 to X8
© Copyright 2021 - 2023 ABB. All rights reserved.
5.3.2 Replacing the axis-1 cabling
Note
xx2100000301
Note
53.
xx2000002009
Continues on next page
5 Repair
Continued
257