ABB CRB 15000 Product Manual page 794

5 Repair
5.6.1 Replacing the axis-1 joint unit (CRB 15000-5/0.95)
Continued
Refitting the base cover (-5/0.95)
1
2
Continues on next page
794
Action
Wipe, lubricate and fit the o-ring to its groove.
Replace if damaged.
Refit the bottom cover with the attachment screws.
Note
For CRB 15000-5/0.95, fit the cover in correct dir-
ection, the protrusion of the cover must face out-
wards.
© Copyright 2021 - 2023 ABB. All rights reserved.
Note
O-ring: 3HAB3772-64
Grease: 3HAC042536-001 (Shell
Gadus S2)
xx2000002016
Hex socket head cap screw: M3x8
12.9 Lafre 2C2B/FC6.9 (8 pcs)
Tightening torque: 1.2 Nm.
xx2000002007
xx2100000268
Product manual - CRB 15000
3HAC077389-001 Revision: L