ABB CRB 15000 Product Manual page 526

5 Repair
5.4.2 Replacing the housing
Continued
Required spare parts
Spare part
Housing
Housing
Flange socket head screw with
glue
Cable tie
Required tools and equipment
Equipment
Lifting aid
Lifting aid
Guide pin, M4x120
Guide pin, M3x110
Standard toolkit
Required consumables
Consumable
Cleaning agent
Flange sealant
Cable ties
Continues on next page
526
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2021 - 2023 ABB. All rights reserved.
Article number Note
3HAC073949-001 Used for CRB 15000-5/0.95.
Also order new attachment
screws for the axis-3 joint unit:
3HAB3413-435 (12 pcs).
3HAC087550-001 Used for CRB 15000-10/1.52 and
CRB 15000-12/1.27.
3HAB3413-435 M4x35 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue , 12 pcs
Used for joint unit of CRB 15000-
5/0.95.
Always use new screws when re-
fitting a joint unit. If ordering a
new joint unit spare part, new
screws are included.
3HAC075545-001 For securing joint unit cable.
Article number Note
3HAC077788-001 For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95.
Attachment screws M4x35 (4 pcs)
are enclosed.
3HAC087788-001 For joint unit on axis 3 of CRB
15000-10/1.52 and CRB 15000-
12/1.27.
3HAC077786-001 Always use guide pins in pairs.
For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95 and axis 3
of CRB 15000-10/1.52 and CRB
15000-12/1.27.
3HAC077787-001 Always use guide pins in pairs.
- Content is defined in section
Standard toolkit on page
Article number Note
- Isopropanol
- Loctite 574
-
1087.
Product manual - CRB 15000
3HAC077389-001 Revision: L