ABB CRB 15000 Product Manual page 755

4
5
Product manual - CRB 15000
3HAC077389-001 Revision: L
Action
Valid for CRB 15000-10/1.52
Refit the swing transition with the attachment
screws.
Always check the serial number printed on the
swing parts and use the parts in the same number
for refitting.
CAUTION
Do not use the pre-assembling screws of swing
parts for securing.
Refit the swing to the base unit, aligning the pin
with the pin hole.
CAUTION
The torque sensor (on the exposed PCBA) is
sensitive to mechanical damage. Handle the as-
sembly with care.
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.5.2 Replacing the swing
Continued
Note
Hex socket head cap screw: M5x25
12.9 Lafre 2C2B/FC6.9 (16 pcs)
Tightening torque: 8.2 Nm
xx2300000817
xx2000001989
Continues on next page
755