ABB CRB 15000 Product Manual page 989

3
4
Disconnecting the tool flange functional earth cable
1
Removing the tool flange adapter
1
Product manual - CRB 15000
3HAC077389-001 Revision: L
5.6.7 Replacing the axis-5 joint unit and the axis-5 to axis-6 transition cabling
Action
Cut the cable ties.
Disconnect the CP/CS connectors from the drive
board and remove the tool flange.
Action
Remove the functional earth cable by removing
the screw.
Action
Remove the tool flange adapter screws.
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
Continued
Note
xx2000002157
xx2000002158
Note
xx2000002159
Note
xx2000002165
Continues on next page
989