Port And System Leds; Installation Options; Mac Address Table; Management Software And Interfaces - Allied Telesis CentreCOM GS970EMX/52 Installation Manual

Gigabit layer 3 lite access switches with 10 gigabit uplinks
Table of Contents

Advertisement

Chapter 1: Overview
Port and System
LEDs
Installation
Options
MAC Address
Table
Management
Software and
Interfaces
24
Note
The ports support full-duplex mode only.
Note
SFP and SFP+ transceivers are sold separately. Refer to the
product's data sheet on the Allied Telesis website for a list of
supported transceivers.
Note
The switches do not support the 7-meter SP10TW7 direct connect
twinax cable.
Here are the port and system LEDs:
Speed/activity and duplex mode LEDs for the 10/100/1000Mbps
copper ports
Speed/activity LEDs for the 1/2.5/5/10Gbps Multi-Gigabit copper
ports
Speed/activity LEDs for the SFP+ ports
Switch ID number LED
Note
Refer to "Port LEDs" on page 31.
Here are the installation options for the switches:
Desk or tabletop
Standard 19-inch equipment rack
Wood or concrete wall
Here are the basic features of the MAC address tables in the switches:
Storage capacity of 16,384 dynamic entries
Storage capacity of 256 static entries
Automatic learning and aging
Here are the management software and interfaces:
AlliedWare Plus Management Software
Local management through the Console port
Remote Telnet and Secure Shell management

Advertisement

Table of Contents
loading

Table of Contents