S
C
M
YSTEM
ONFIGURATION AND
SHOW SYSTEM PCI DEVICE
show system pci device
Overview
Use this command to display the PCI devices on your device.
show system pci device
Syntax
Mode
User Exec and Privileged Exec
Example
To display information about the PCI devices on your device, use the command:
awplus#
Output
Figure 7-23: Example output from the show system pci device command
awplus#show system pci device
00:00.0 Class 0600: 14e4:5300 (rev 01)
Subsystem: 14e4:5300
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at 18000000 (64-bit, non-prefetchable) [size=16K]
Memory at <unassigned> (64-bit, non-prefetchable) [size=128M]
Capabilities: [40] Power Management version 3
Capabilities: [58] #09 [0078]
Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable
-
Capabilities: [d0] #10 [0041]
00:01.0 Class 0200: 14e4:b321 (rev 12)
Subsystem: 14e4:4d4c
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at 08000000 (64-bit, non-prefetchable) [size=256K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable
-
Capabilities: [a0] #11 [0000]
Capabilities: [ac] #10 [0002]
Related
show system environment
commands
show system pci tree
C613-50644-01 Rev B
C
ONITORING
OMMANDS
show system pci device
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
277