Figure 53: Show System Command; Figure 54: Show License Brief Command - Allied Telesis AT-x550-18XTQ Installation Manual

Chapter 6: Verifying the Status of the Switches
Board region: Global
Feature licenses on stack member 1:
---------------------------------------------------------------------
Index License name
Type
---------------------------------------------------------------------
1 Base License
Full
96
awplus# show system
Examine the command output for the lines in Figure 53.
Current software: x550-5.4.7A-20170417-1.rel
Software version : 5.4.7A-20170417-1
Figure 53. SHOW SYSTEM Command
5. Write down on paper the software version number on the switch.
6. In the Privileged Exec mode, enter the SHOW LICENSE BRIEF
command:
awplus# show license brief
The command output has the following two sections:
 Feature licenses on stack member
 Release licenses on stack member
Figure 54 is an example of the feature licenses section.
Quantity
-
Figure 54. SHOW LICENSE BRIEF Command
7. Write down on paper the names of the feature licenses on the switch.
The switch comes with the base license.
8. Repeat this procedure on the second switch. Afterwards, continue with
the next step.
9. Compare their management software version numbers and do one of
the following:
 If they are both the same, go to the next step.
 If they are different, mark the switch with the newer management
software so that you can identify it. You will probably want that
switch to be the initial master switch when you power on the stack
for the first time. Then go to the next step.
Customer name
Period
Base License
N/A