Show System - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

S C M
YSTEM ONFIGURATION AND

SHOW SYSTEM

show system
Overview This command displays general system information about the device, including
the hardware, installed, memory, and software versions loaded. It also displays
location and contact details when these have been set.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show system
Syntax
Mode User Exec and Privileged Exec
Example To display configuration information, use the command:
awplus#
Output Figure 5-16: Example output from show system

awplus#show system
System Status

Board ID Bay
--------------------------------------------------------------------------------
Base 482
--------------------------------------------------------------------------------
RAM: Total: 477252 kB Free: 368184 kB
Flash: 112.8MB Used: 3.4MB Available: 109.4MB
--------------------------------------------------------------------------------
Environment Status : Normal
Uptime
Bootloader version : 5.1.3


Current software
Software version
Build date

Current boot config: flash:/default.cfg (file exists)

System Name
awplus
System Contact

System Location
Related show system environment
Commands
613-50157-01 Rev C
C
ONITORING OMMANDS
show system
Board Name
AT-FS980M/52PS
: 0 days 00:22:25
: FS980-5.4.6-1.5.rel
: 5.4.6-1.5
: Fri Sep 30 05:35:20 UTC 2016
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Guide.
Wed Oct 19 02:26:49 2016
Rev Serial number
X1-0 FS980M52PS000009
"Getting Started
218