Command Reference Guide
IKE Policy Command Set
This policy-specific command allows you to manually set the local ID for an IKE policy on a per-policy
basis. You can use both methods simultaneously in the product. Several IKE policies can be created, some
of which use the default system setting of the IPv4 address of the public interface. Others can be set to
override this system setting and manually configure a local ID specific to those policies. When a new IKE
policy is created, they default to no local-id. This allows the system local ID setting to be applied to the
policy.
Usage Examples
The following example sets the local ID of this IKE policy to the IPv4 address 63.97.45.57:
(config)#crypto ike policy 1
(config-ike)#local-id address 63.97.45.57
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3964