ADTRAN AOS Version R10.1.0 Command Reference Manual page 3965

Command Reference Guide
nat-traversal
Use the nat-traversal command to allow, force, or disable network address translation (NAT) traversal
versions 1 and 2 on a specific Internet key exchange (IKE) policy. Use the no form of this command to
disable this feature. Variations of this command include:
nat-traversal v1 allow
nat-traversal v1 disable
nat-traversal v1 force
nat-traversal v2 allow
nat-traversal v2 disable
nat-traversal v2 force
Syntax Description
v1
v2
allow
disable
force
Default Values
The default values for this command are nat-traversal v1 allow and nat-traversal v2 allow.
Command History
Release 7.1
Usage Examples
The following example disables version 2 on IKE policy 1:
(config)#crypto ike policy 1
(config-ike)#nat-traversal v2 disable
60000CRG0-35E
Specifies NAT traversal version 1.
Specifies NAT traversal version 2.
Sets the IKE policy to allow the specified NAT traversal version.
Sets the IKE policy to disable the specified NAT traversal version.
Sets the IKE policy to force the specified NAT traversal version.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
IKE Policy Command Set
3965