ADTRAN AOS Version R10.1.0 Command Reference Manual page 3968

Command Reference Guide
respond
Use the respond command to allow the Internet key exchange (IKE) policy to respond to negotiations by a
peer. Use the no form of this command to allow the policy to only initiate negotiations. Variations of this
command include:
respond aggressive
respond anymode
respond main
Syntax Description
aggressive
anymode
main
Default Values
By default, respond to any mode is enabled.
Command History
Release 4.1
Functional Notes
By using the initiate and respond commands, you can configure the IKE policy to initiate and respond,
initiate only, or respond only. It is an error if you have both initiate and respond disabled.
Usage Examples
The following example configures the router to initiate and respond to IKE negotiations:
(config)#crypto ike policy 1
(config-ike)#respond anymode
60000CRG0-35E
Specifies to respond only to aggressive mode.
Specifies to respond to any mode.
Specifies to respond only to main mode.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
IKE Policy Command Set
3968