Description - H3C MSR Series Command Reference Manual

Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of
the impacts of this command when you use it in a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] default
This command will restore the default settings. Continue? [Y/N]:y

description

Use description to change the description of the VLAN or VLAN-interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description for a VLAN is VLAN vlan-id, which is the ID of the VLAN. For example, the default
description of VLAN 100 is VLAN 0100. The default description for a VLAN-interface is the name of
the interface. For example, the default description of VLAN-interface 1 is Vlan-interface1 Interface.
Views
VLAN view, VLAN-interface view
Default command level
2: System level
Parameters
text: Description for a VLAN or VLAN-interface. The string can include case-sensitive letters, digits,
special characters such as tilde (~), exclamation point (!), at sign (@), pound sign (#), dollar sign ($),
percent sign (%), caret (^), ampersand sign (&), asterisk (*), left brace({), right brace (}), left
parenthesis ((), right parenthesis ()), left bracket ([), right bracket (]), left angle bracket (<), right angle
bracket (>), hyphen (-), underscore(_), plus sign (+), equal sign (=), vertical bar (|), back slash (\),
colon (:), semi-colon (;) quotation marks ("), apostrophe ('), comma (,), dot (.), and slash (/), spaces,
and other Unicode characters and symbols.
•
For a VLAN, this is a string of 1 to 32 characters.
•
For a VLAN-interface, this is a string of 1 to 80 characters.
When you specify a description, follow these guidelines:
•
Each Unicode character takes the space of two regular characters.
13