Led Description; Technical Specifications - H3C MSR830-6EI-GL Manual

LED description

LEDs
GE port LED
System status
LED (SYS)
VPN status
LED
Micro SD card
LED
Combo
interface LED

Technical specifications

Table1-2 Technical specifications
Item
Console ports
USB ports
GE ports
SFP ports
Micro SD
slots
State
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Steady green
Flashing green (8 Hz)
Flashing green (1 Hz)
Flashing yellow (1 Hz)
Flashing yellow (8 Hz)
Steady yellow
Off
Steady on
Off
Steady green
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
MSR830-6EI-GL MSR830-10EI-GL
1 1
N/A 1
6 10
N/A N/A
N/A N/A
Description
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100 Mbps
No link is present.
The SDRAM is performing self-test.
The system software image is being copied and
decompressed.
Comware has started with the configuration file and the router
has booted up.
The SDRAM has failed the self-test.
The extended segment does not exist.
The boot image does not exist.
No power input, or exceptions have occurred.
A minimum of one IPsec VPN tunnel is present.
No IPsec VPN tunnel is present.
An inserted Micro SD card has passed the detection.
No Micro SD card is inserted or a Micro SD card is incorrectly
inserted.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100 Mbps.
No link is present.
MSR830-6HI-GL
1
1
6
1
1
1-5
MSR830-10HI-GL
1
1
10
1
1