Display Nat All - H3C S9500 Series Command Manual

Command Manual – NAT
H3C S9500 Series Routing Switches
View
Any view
Parameters
None
Description
Use the display nat aging-time command to display the aging time of a NAT entry.
Examples
# View the aging times of the NAT entries of various protocols.
<H3C> display nat aging-time
NAT aging-time value information:
alg
ftp
h.323 ---- aging-time value is
ils
The slot 5 NP-Timer configuration:
Selection of NP-Timer is : Slow-Timer
Fast-Timer : 1 seconds
Slow-Timer: 300 seconds

1.1.3 display nat all

Syntax
display nat all
View
Any view
Parameters
None
Description
Use the display nat all command to display all the configurations about NAT.
Examples
# Display all the configurations about NAT.
<H3C> display nat all
NAT address-group information:
No address-groups have been configured
---- aging-time value is
---- aging-time value is
---- aging-time value is
Chapter 1 NAT Configuration Commands
120 (seconds)
7200 (seconds)
600 (seconds)
600 (seconds)
1-2