Display Qos-Interface All - H3C s3100 series Command Manual

Table 1-1 Description on the fields of the display qos-global command
Field
Inbound
Matches
Target rate
Conform action
Exceed action
meter-statistic running
62284 byte outprofile
82521 byte inprofile

display qos-interface all

Syntax
display qos-interface { interface-type interface-number | unit-id } all
View
Any view
Parameter
interface-type interface-number:
configuration information is to be displayed.
unit-id: Unit ID, which is fixed to 1. With this argument specified, the QoS-related configuration of all the
ports on the device is displayed.
Description
Use the display qos-interface all command to display the QoS-related configuration of a port or all the
ports on the device.
Example
# Display the QoS-related configuration of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet 1/0/1 all
Ethernet1/0/1: line-rate
Inbound: 1024 Kbps
Ethernet1/0/1:
Queue scheduling mode: weighted round robin
weight of queue 0: 12
weight of queue 1: 8
weight of queue 2: 4
Packet direction
ACL rules for traffic classifying
Traffic policing target rate
Action conducted to packet conforming to the traffic specification
Action conducted to packets exceeding the traffic specification
The function of collecting traffic policing statistics information is
enabled (meter-statistic not running indicates that the function is not
enabled)
Size of the packets exceeding the traffic specification (in bytes)
Size of the packets conforming to the traffic specification (in bytes)
Specifies the type and number of a port, for which the QoS
1-6
Description