Ike Next-Payload Check Disabled - H3C MSR 20-20 Command Reference Manual

Parameter
Description
Related command:
Example

ike next-payload check disabled

Syntax
View
Parameter
Description
Example
name: Name of the local gateway for IKE negotiation, a string of 1 to 32
characters.
Use the
ike local-name
Use the
undo ike local-name
By default, the device name is used as the name of the local gateway
If the IKE negotiation initiator uses the gateway name to perform IKE negotiation
(that is, the id-type name command is configured on the initiator), you need to
configure the ike local-name command on the local device. The IKE negotiation
initiator sends its gateway name as identification to its peer and the peer uses the
gateway name configured with the remote-name name command to
authenticate the initiator. Therefore, make sure the local gateway name for a
device is identical to the remote gateway name configured on its peer.
remote-name, id-type name.
# Configure the local gateway name as app.
<Sysname> system-view
[Sysname] ike local-name app
ike next-payload check disabled
undo ike next-payload check disabled
System view
None
Use the ike next-payload check disabled
the Next payload field in the last payload of an IKE message during IPSec
negotiation, gaining interoperation with products assigning the field a value other
than zero.
Use the
undo ike next-payload check disabled
default.
By default, the Next payload field is checked.
# Disable Next payload field checking for the last payload of an IKE message.
<Sysname> system-view
[Sysname] ike next-payload check disabled
command to configure a name for the local gateway.
command to restore the default.
command to disable the checking of
command to restore the
2163