Ike Local-Name; Ike Dpd - H3C MSR 20-20 Command Reference Manual

2162 C 141: IKE C
HAPTER
Description
Related command:
Example

ike dpd

Syntax
View
Parameter
Description
Example

ike local-name

Syntax
View
C
ONFIGURATION OMMANDS
Use the id-type
Use the
undo id-type
By default, the type of IP address is used in IKE negotiation.
Note that:
In main mode, only the ID type of IP address can be used in performing IKE
■
negotiation and creating an SA.
In aggressive mode, either type can be used.
■
ike local-name, remote-name, remote-address, local-address,
exchange-mode.
# Use the ID type of name in IKE negotiation.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] id-type name
ike dpd dpd-name
undo ike dpd dpd-name
System view
dpd-name: Name for the dead peer detection (DPD), a string of 1 to 15 characters.
Use the
ike dpd
Use the
undo ike dpd
# Create a DPD named dpd2.
<Sysname> system-view
[Sysname] ike dpd dpd2
ike local-name name
undo ike local-name
System view
command to select the type of the ID in IKE negotiation.
command to restore the default.
command to create a DPD and enter IKE DPD view.
command to remove a DPD.