Ike Sa Keepalive-Timer Interval; Ike Sa Keepalive-Timer Timeout - H3C MSR 20-20 Command Reference Manual

Example

ike sa keepalive-timer interval

Syntax
View
Parameter
Description
Related command:
Example

ike sa keepalive-timer timeout

Syntax
View
Parameter
Description
# Create IKE proposal 10 and enter IKE proposal view.
<Sysname> system-view
[Sysname] ike proposal 10
[Sysname-ike-proposal-10]
ike sa keepalive-timer interval seconds
undo ike sa keepalive-timer interval
System view
seconds: Transmission interval of ISAKMP SA keepalives in seconds, in the range
20 to 28,800.
Use the
ike sa keepalive-timer interval
keepalive interval.
Use the undo ike sa keepalive-timer interval
ISAKMP SA keepalive transmission function.
By default, no keepalive packet is sent.
Note that the keepalive interval configured at the local end must be shorter than
the keepalive timeout configured at the remote end.
ike sa keepalive-timer timeout.
# Set the keepalive interval to 200 seconds.
<Sysname> system-view
[Sysname] ike sa keepalive-timer interval 200
ike sa keepalive-timer timeout seconds
undo ike sa keepalive-timer timeout
System view
seconds: ISAKMP SA keepalive timeout in seconds, in the range 20 to 28,800.
Use the
ike sa keepalive-timer timeout
keepalive timeout.
Use the
undo ike sa keepalive-timer timeout
function.
command to set the ISAKMP SA
command to disable the
command to asset the ISAKMP SA
command to disable the
2165