Ike Proposal; Ike Peer (System View) - H3C MSR 20-20 Command Reference Manual

2164 C 141: IKE C
HAPTER

ike peer (system view)

Syntax
View
Parameter
Description
Example

ike proposal

Syntax
View
Parameter
Description
Related command:
C
ONFIGURATION OMMANDS
ike peer peer-name
undo ike peer peer-name
System view
peer-name: IKE peer name, a string of 1 to 15 characters.
Use the
ike peer
Use the
undo ike peer
# Create an IKE peer named peer1 and enter IKE peer view.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1]
ike proposal proposal-number
undo ike proposal proposal-number
System view
proposal-number: IKE proposal number, in the range 1 to 100. It also stands for
the priority, with a smaller value meaning a higher priority. During an IKE
negotiation, the system matches IKE proposals by proposal number, starting from
the smallest one.
Use the
ike proposal
view.
Use the
undo ike proposal
The system provides a default IKE proposal, which has the lowest priority and uses
these settings.
Encryption algorithm: DES-CBC;
■
Authentication algorithm: HMAC-SHA1;
■
Authentication method: Pre-shared Key;
■
DH group: MODP_768;
■
SA lifetime: 86, 400 seconds.
■
display ike proposal.
command to create an IKE peer and enter IKE peer view.
command to delete an IKE peer.
command to create an IKE proposal and enter IKE proposal
command to delete an IKE proposal.