Ipv6 System Configuration; Figure 7. Ipv6 System Settings Page - Allied Telesis AT-GS950/48 User Manual
Hide thumbs
Also See for AT-GS950/48:
- User manual (406 pages) ,
- Installation manual (60 pages) ,
- Datasheet (2 pages)
Table of Contents
Advertisement
Chapter 2: System Configuration
IPv6 System Configuration
34
This procedure explains how to enable IPv6 and configure IPv6 system
settings.
To enable IPv6 and configure the switch's IPv6 settings, perform the
following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select IPv6 System Settings.
The IPv6 System Settings Page is displayed. See Figure 7.
Figure 7. IPv6 System Settings Page
3. To enable or disable IPv6 on the switch, select Enabled or Disabled
from the IPv6 State pull-down menu.
4. To enable or disable the DHCPv6 Client on the switch, select Enabled
or Disabled from the DHCPv6 pull-down menu.
Hide quick links:
Advertisement
Table of Contents
