Configuring All Ports With The Same Speed And Duplex Settings - Allied Telesis AT-GS920/16 Installation And User Manual

Figure 53. DIP Switch Settings for Configuring All Ports
3. Push the MODE button for less than 1 second to select a
pre-configured port configuration setting.
You can select one from six pre-configured settings;
– Auto-Negotiation
– 1000M in full duplex
– 100M in full duplex
– 100M in half duplex
– 10M in full duplex
– 10M in half duplex.
Each time you press the MODE button, the port configuration
advances to the next pre-configured setting in the sequence. Figure 54
shows the sequence and each MODE LEDs display.
Figure 54. Port Configuration
Chapter 4: Switch Configuration
85