Chapter 2: System Configuration
IPv6 System Configuration
32
This procedure explains how to enable IPv6 and configure IPv6 system
settings.
To enable IPv6 and configure the switch's IPv6 settings, perform the
following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select IPv6 System Settings.
The IPv6 System Settings Page is displayed. See Figure 7.
Figure 7. IPv6 System Settings Page
3. Select Enabled or Disabled from the IPv6 State pull-down menu.
4. Select Enabled or Disabled from the DHCPv6 pull-down menu.