VLAN C
OMMANDS
VLAN DATABASE
vlan database
Overview
Use this command to enter the VLAN Configuration mode.
vlan database
Syntax
Mode
Global Configuration
Usage
Use this command to enter the VLAN configuration mode. You can then add or
delete a VLAN, or modify its values.
Example
In the following example, note the change to VLAN configuration mode from
Configure mode:
awplus#
awplus(config)#
awplus(config-vlan)#
Related
vlan
Commands
C613-50170-01 Rev B
configure terminal
vlan database
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
617