Vlan Database - Allied Telesis IE340 Series Command Reference Manual

VLAN C
OMMANDS

VLAN DATABASE

vlan database
Overview Use this command to enter the VLAN Configuration mode. You can then add or
delete a VLAN, or modify its values.
vlan database
Syntax
Mode Global Configuration
Example In the following example, note the change to VLAN Configuration mode from
Global Configuration mode:
awplus#
awplus(config)#
awplus(config-vlan)#
Related vlan
commands
Command Version 5.5.0-1.3: Support for up to 5 VLANs added to AR1050V
changes
C613-50631-01 Rev A
configure terminal
vlan database
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
693