VLAN C
OMMANDS
VLAN DATABASE
vlan database
Overview
Use this command to enter the VLAN Configuration mode. You can then add or
delete a VLAN, or modify its values.
vlan database
Syntax
Mode
Global Configuration
Example
In the following example, note the change to VLAN Configuration mode from
Global Configuration mode:
awplus#
awplus(config)#
awplus(config-vlan)#
Related
vlan
commands
Command
Version 5.5.0-1.3: Support for up to 5 VLANs added to AR1050V
changes
C613-50644-01 Rev B
configure terminal
vlan database
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
643