Vlan Database - Allied Telesis x310-26FT Command Reference Manual

VLAN C
OMMANDS

VLAN DATABASE

vlan database
Overview Use this command to enter the VLAN Configuration mode.
vlan database
Syntax
Mode Global Configuration
Usage Use this command to enter the VLAN configuration mode. You can then add or
delete a VLAN, or modify its values.
Example In the following example, note the change to VLAN configuration mode from
Configure mode:
awplus#
awplus(config)#
awplus(config-vlan)#
Related vlan
Commands
C613-50103-01 REV A
configure terminal
vlan database
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
526