No Debug All - Allied Telesis AT-x510-28GTX Command Reference Manual

S C M
YSTEM ONFIGURATION AND

NO DEBUG ALL

no debug all
Overview This command disables the debugging facility for all features on your device. This
stops the device from generating any diagnostic debugging messages.
The debugging facility is disabled by default.
Syntax no debug all [ipv6|dot1x|nsm|ospf|vrrp]
Mode Global Configuration and Privileged Exec
Example To disable debugging for all features, use the command:
awplus#
To disable all 802.1X debugging, use the command:
awplus#
To disable all IPv6 debugging, use the command:
awplus#
To disable all NSM debugging, use the command:
awplus#
To disable all OSPF debugging, use the command:
awplus#
To disable all VRRP debugging, use the command:
awplus#
Related undebug all
Commands
C613-50102-01 REV C
C
ONITORING OMMANDS
Parameter Description
dot1x
Turns off all debugging for IEEE 802.1X port-based network access-
control.
ipv6
Turns off all debugging for IPv6 (Internet Protocol version 6).
nsm
Turns off all debugging for the NSM (Network Services Module).
ospf
Turns off all debugging for OSPF (Open Path Shortest First).
vrrp
Turns off all debugging for VRRP (Virtual Router Redundancy Protocol).
no debug all
no debug all dot1x
no debug all ipv6
no debug all nsm
no debug all ospf
no debug all vrrp
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
242