No Debug All - Allied Telesis AT-IX5-28GPX Manual

S C M
YSTEM ONFIGURATION AND

NO DEBUG ALL

no debug all
Overview This command disables the debugging facility for all features on your device. This
stops the device from generating any diagnostic debugging messages.
The debugging facility is disabled by default.
Syntax
no debug all [dot1x|ipv6|nsm]
Mode Global Configuration and Privileged Exec
Example To disable debugging for all features, use the command:
awplus#
To disable all 802.1X debugging, use the command:
awplus#
To disable all IPv6 debugging, use the command:
awplus#
To disable all NSM debugging, use the command:
awplus#
Related undebug all
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING OMMANDS
Parameter Description
Turns off all debugging for IEEE 802.1X port-based network access-
dot1x
control.
Turns off all debugging for IPv6 (Internet Protocol version 6).
ipv6
Turns off all debugging for the NSM (Network Services Module).
nsm
no debug all
no debug all
no debug all
no debug all
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
217