Copy (Filename) - Allied Telesis IE220 Series Manual

F C M
ILE AND ONFIGURATION ANAGEMENT
( )
COPY FILENAME

copy (filename)

Overview This command copies a file. This allows you to:
•
•
•
•
copy [force] <source-name> <destination-name>
Syntax
Mode Privileged Exec
Examples To use TFTP to copy the file "bob.key" into the current directory from the remote
server at 10.0.0.1, use the command:
awplus#
To use SFTP to copy the file "new.cfg" into the current directory from a remote
server at 10.0.1.2, use the command:
awplus#
To use SCP with the username "beth" to copy the file old.cfg into the directory
config_files on a remote server that is listening on TCP port 2000, use the
command:
awplus#
To copy the file "newconfig.cfg" onto your device's Flash from a USB storage
device, use the command:
awplus#
To copy the file "newconfig.cfg" to a USB storage device from your device's Flash,
use the command:
awplus#
C613-50644-01 Rev B
C
OMMANDS
copy files from your device to a remote device
copy files from a remote device to your device
copy files stored on Flash memory to or from a different memory type, such
as a USB storage device
create two copies of the same file on your device
Parameter
force
<source-name>
<destination-name>
copy tftp://10.0.0.1/bob.key bob.key
copy sftp://10.0.1.2/new.cfg bob.key
copy scp://beth@serv:2000/config_files/old.cfg old.cfg
copy usb:/newconfig.cfg flash:/newconfig.cfg
copy flash:/newconfig.cfg usb:/newconfig.cfg
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
This parameter forces the copy command to overwrite the
destination file, if it already exists, without prompting the
user for confirmation.
The filename and path of the source file. See
on page 104 for valid syntax.
The filename and path for the destination file. See
Introduction on page 104 for valid syntax.
Introduction
115