Match Ipv6 Next-Hop - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

match ipv6 next-hop

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
match ipv6 next-hop
{ accessListName [ accessListName ]* | prefix-list prefixListName
[ prefixListName ]* }
no match ipv6 next-hop [ [ accessListName ]* | prefix-list [ prefixListName ]* ]
Command introduced before JunosE Release 7.1.0.
Matches any routes that have a next-hop router address passed by the specified access
list or prefix list. The no version removes all next-hop match clauses from a route map
unless you specify either an access list or prefix list, in which case only the list match is
removed from the route map.
accessListName—String of up to 32 alphanumeric characters
prefixListName—Name of a single prefix list; string of up to 32 characters
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Policy List Configuration, Route Map Configuration
Chapter 13: M Commands
1273