Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 48

JunosE 11.3.x Command Reference Guide N to Z
6
Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx
Models, and ERX310 Router (continued)
Interface Type Description
ATM
interface or
subinterface
ATM 1483
subinterface
Interface Specifier
To configure an ATM interface or subinterface:
slot/port[.subinterface ]
slot—Number of the chassis slot in the range
0–6 (ERX7xx models), 0–13 (ERX14xx
models), and 0–2 (ERX310 router)
port—Port number on the I/O module
subinterface—Number of the subinterface
in the range 1–2147483647
To display information about an ATM 1483
subinterface by using show commands:
slot/port/vpi/vci
slot—Number of the chassis slot in the range
0–6 (ERX7xx models), 0–13 (ERX14xx
models), and 0–2 (ERX310 router)
port—Port number on the I/O module
vpi—Virtual path identifier of the PVC on this
ATM 1483 subinterface; allowable numeric
range depends on the module capabilities
and current configuration
vci—Virtual circuit identifier of the PVC on
this ATM 1483 subinterface; allowable
numeric range depends on the module
capabilities and current configuration
Copyright © 2010, Juniper Networks, Inc.
Example
atm 3/2.6
atm 3/2/1/2