Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 51

Copyright © 2010, Juniper Networks, Inc.
Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx
Models, and ERX310 Router (continued)
Interface Type Description
mplsL2shim MPLS shim
interface
mplsMajor MPLS major
interface
mplsMinor MPLS minor
interface
null Null
interface,
which acts as
a data sink
and cannot
forward or
receive
traffic. You
cannot
configure
values on the
null interface.
pos Packet over
SONET
(POS)
interface
serial CT3, E3
Frame, T3
Frame, or
cOCx/STMx
interface
Chapter 1: Command Reference Topics
Interface Specifier
slot/port[.subinterface ]
slot—Number of the chassis slot in the range
0–6 (ERX7xx models), 0–13 (ERX14xx
models), and 0–2 (ERX310 router)
port—Port number on the I/O module
subinterface—Number of the subinterface
in the range 1–2147483647
slot/port[.subinterface ]
slot—Number of the chassis slot in the range
0–6 (ERX7xx models), 0–13 (ERX14xx
models), and 0–2 (ERX310 router)
port—Port number on the I/O module
subinterface—Number of the subinterface
in the range 1–2147483647
[ vr:]tunnel-name
vr—Name of a virtual router
tunnel-name—Name of the tunnel
0
slot/port[.subinterface ]
slot—Number of the chassis slot in the range
0–6 (ERX7xx models), 0–13 (ERX14xx
models), and 0–2 (ERX310 router)
port—Port number on the I/O module
subinterface—Number of the subinterface
in the range 1–2147483647
Refer to the individual formats listed below.
Example
mplsL2shim 3/2.1
mplsMajor 3/2.1
mplsMinor
lsp-02020202-1-4
null 0
pos 3/2
9