Include-Mp-Next-Hop; Indirect-Next-Hop - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

include-mp-next-hop

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

indirect-next-hop

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
2056
®
OS for EX Series Ethernet Switches, Release 10.4
include-mp-next-hop;
[edit logical-systems logical-system-name protocols bgp],
[edit protocols bgp]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable multiprotocol updates to contain next-hop reachability information.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Including Next-Hop Reachability Information in Multiprotocol Updates
(indirect-next-hop | no-indirect-next-hop);
[edit logical-systems logical-system-name routing-options forwarding-table],
[edit routing-options forwarding-table]
Statement introduced in Junos OS Release 8.2.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable indirectly connected next hops for route convergence.
NOTE: When virtual private LAN service (VPLS) is configured on the routing
device, the
indirect-next-hop
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Enabling Indirect Next Hops
statement is not supported.
Copyright © 2010, Juniper Networks, Inc.